Check Point 61000 Manual de servicio Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 47
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Inserting Security Gateway Modules
Inserting Security Gateway Modules
To insert a Security Gateway Module:
1. Open the latches at the top and bottom of the Security Gateway Module.
2. Make sure the SGM is located correctly on the chassis rail.
3. Slide the Security Gateway Module into the allocated slot.
4. Fasten the latches.
5. Tighten the tumble screws.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Comentarios a estos manuales

Sin comentarios