Check Point 61000 Manual de servicio descargar pdf (Pagina 10)

61000 Security System Front Panel Modules

Hardware Components Page 10

Item

Description

The Security Switch Module (SSM) distributes network traffic to the Security Gateway

Modules and forwards traffic from the Security Gateway Modules. One or two can be

inserted in a chassis. Two SSM versions are available:

 SSM60

 SSM160

For more about each port, see Security Switch Module Ports (on page 11).

The Chassis Management Module (CMM) monitors the status of the chassis hardware

components.

If the Chassis Management Module fails or is removed from the chassis, the 61000 Security

System continues to forward traffic. However, hardware monitoring is not available. Adding

or removing an Security Gateway Module to or from the chassis is not recognized.

A second Chassis Management Module can be used to supply CMM High Availability.

In the CLI output, the lower slot is listed bay 1. The upper slot is listed as bay2.

 Power:

 AC Power Supply Units (PSUs)

 100 VAC to 240 VAC

 3-5 PSUs (minimum of 3 recommended)

Or:

 DC Power Entry Modules (PEMs)

 48 VDC to 60 VDC

 1-2 PEMs

 Field-replaceable and hot-swappable

In the CLI output:

 Upper slots are listed as bay 1, bay 2 and bay 3, numbered right to left.

 The lower slots are listed as bay4, bay 5 and bay 6, numbered right to left.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Sin comentarios

Check Point 61000 Manual de servicio Pagina 10